Tag Archives: milk vacuum pump

China Milk Piston Vacuum Pump (GJB8000-25) crankshaft pulley

Item Description

Milk Piston Vacuum Pump (GJB8000-25)

Introduction
Force by way of an adjustable present-limiting gap method, the development of reduction of strain enlargement, explosion, shear, blended result of higher-speed collision, the particles and liquid droplets shatter into very small dimension, whilst making an excellent answer or dispersion of emulsion.  Merchandise steadiness, consistency, combined, and simple absorption, nutritional value, shelf lifestyle, flavor, shade, safety routines are recognized in the homogeneous process.
 
Software:
It is commonly employed in food, dairy, beverage, pharmaceutical, good chemicals and bio-engineering and other fields of creation, scientific research and technological development.
one)For milk,soybean milk,could make body fat globule slender observably,make it easy to assimilate.It is great to boost the edible worth.
two)For ice product,make the liquid wonderful and loosen and improve internal high quality.
three)For emulsion,colloid,juice,serosity,could keep away from and lower the separated levels of liquid material,boost the visual appeal of liquid substance,and make it equivalent coloury liquid.
4)As transportation pump usage
It will appear into large strain by our device.Powder will be produced by dryness equipment.Our equipment is essential procedure of manufactorying powder.
 
Function:
This machine are functions with great layout,practical procedure and basic upkeep,and basic safety.
1)Lower sound:Noise of transmission is reduced than sounds of motor. The pointer of strain meter is steady, and also the selection of swing of pointer is less than 2M Pa.
2)Smashing granularity is between .1 CZPT to .2 micron, and their regular size≤1 micron.
3)Sealing materials can work underneath significantly less than 150ºC, and the components touching substance is produced of stainless steel which can stay up to the acid and alkali. All of valves and plungers are manufactured of special content, so they are sturdy and economical. The bearing is also durable simply because it is produced of unique alloy material, which is the far more friction, the more hardness.
4)Lubrication of  homogenizers is credible, and it only want altering oil the very first time when work 800 several hours to one thousand hrs, considering that then it need to be transformed oil for every yr afterwards
5)The higher the strain the finer the substance the more uniform particle dimension, 30MPA the adhering to designs, mainly for liquid – liquid emulsification. Pressure of 30MPA earlier mentioned, on the liquid – strong dispersion of liquid into perform when the stress most of the content up to 60MPA achieve 2μm particle dimension less than when the materials reaches 80MPA more evident when the function is mainly utilized for ultrafine particles broken Resources to accomplish the following basic 1μm. As to 100MPA previously mentioned, can be created a lot more subtle particles, some of the substance particles right after recurring high stress homogenization, .1-.5μm can be ready the subsequent no-grain components.
 
Warranty:
twelve months
 
Item Technical specs

Name Massive homogenizer
sort GJB8000-25
Rated movement(l/h) 8000
Rated stress(MPa) 25
Functioning stress(MPa) -twenty
Fat ( kg) 2550
Dimensions (cm) 250X120X110
Energy (Kw) sixty five

If you want more information ,you can make contact with us at any time,we will try our very best to solve your
Problem.

US $11,000-12,313
/ Set
|
1 Set

(Min. Order)

###

Application: Milk, Yogurt, Milk Powder, Cheese
Customized: Customized
Capacity: 8000L/H
Max Working Pressure: 20MPa
Power: 45kw
Voltage: 380V, 50Hz, 3 Phase

###

Customization:

###

Name Large homogenizer
type GJB8000-25
Rated flow(l/h) 8000
Rated pressure(MPa) 25
Working pressure(MPa) 0-20
Weight ( kg) 2550
Size (cm) 250X120X110
Power (Kw) 65
US $11,000-12,313
/ Set
|
1 Set

(Min. Order)

###

Application: Milk, Yogurt, Milk Powder, Cheese
Customized: Customized
Capacity: 8000L/H
Max Working Pressure: 20MPa
Power: 45kw
Voltage: 380V, 50Hz, 3 Phase

###

Customization:

###

Name Large homogenizer
type GJB8000-25
Rated flow(l/h) 8000
Rated pressure(MPa) 25
Working pressure(MPa) 0-20
Weight ( kg) 2550
Size (cm) 250X120X110
Power (Kw) 65

Overview of Different Types of Pulleys

A pulley is a wheel mounted on a shaft or shaft. Its purpose is to facilitate the movement or change of direction of the cable or taut rope, and to transmit power between the cable and the shaft. Pulleys are typically used for lifting, winding or forklift applications. If you are building your own pulley system, the following design and installation considerations should be followed. This article will give you an overview of the different types of pulleys.
pulley

Pulley System Mechanics

There are many different ways to utilize the mechanism of the pulley system. The most basic pulley system consists of a fixed wheel and a support frame. Both components are connected by ropes or cables used to support the load. A pulley system is effective when the force required to lift the load is less than the weight of the object being lifted.
One way to use a pulley system is to suspend a block with a mass of 0.80 kg on a fixed pulley. Then another person can hang a bucket weighing up to 40kg. The weight of the bucket is transferred to the fixed pulley. The rope is attached to the pulley by a loop or sling. The rope will spin and pull on the barrel or block.
The pulley system is also an important tool for lifting heavy objects. Pulleys are often used in construction equipment to make lifting heavy objects easier. Gun tackles, yard tackles, and stationary tackle systems are common examples of these devices. They use the mechanical advantage of the design to guide the force that lifts the object. If you want to learn more about pulley systems, visit Vedantu. This website will provide you with a full description of the mechanism and its application.

Types of pulleys

Many different types of pulleys are used to lift heavy objects. They change the direction of the force and are an integral part of the cable system. Therefore, pulleys can move large and heavy objects more easily. However, before buying a pulley, you should have an idea of ​​the benefits it brings. Below are some of the most common uses for pulleys.
Conical Pulley: Consists of several small conical pulleys connected to each other. The larger base of one pulley is used to guide the force. Round pulleys are used in the same way as step pulleys. They are widely used in industry and can be purchased at any hardware store. Pulleys are a huge investment, and the benefits they provide far outweigh the cost.
Movable Pulls: These are similar to their names, but work by allowing objects to move with the pull. Their movable parts are attached to the object to be lifted. They are also ideal for lifting heavy loads and can be found in utility elevators and construction cranes. They are also used in many other industries. They can also be made of wood, plastic or metal. The type of pulley you use depends on its intended use.

Mechanical Advantages of Pulley Systems

A pulley system is a simple machine that reduces the effort required to lift heavy loads. This mechanical advantage is proportional to the number of loops. For example, if you have a single rope loop, you must apply equal force to lift the weight. When you add another rope loop, you can lift heavier weights just by applying the same force. Therefore, a pulley system is an excellent way to use gravity to your advantage.
Mechanical advantage is a measure of the effectiveness of a pulley system. This ratio of force to work is called the mechanical advantage. In other words, if the rope system has a large mechanical advantage, it means that it requires less force to lift heavier loads. This advantage is usually measured in kilograms and is the same for all pulley systems. In general, the greater the mechanical advantage, the less effort is required to lift the load.
The mechanical advantage of a pulley system is that a single movable pulley requires half the force to lift an object than a single fixed pulley. Assuming frictionless bearings, the MA of a single pulley system is 2, similar to the MA of a single lever. A single pulley travels twice as much as it takes to move heavy objects manually.
pulley

Considerations when designing and installing a pulley system

The capacity of the pulley depends on the type and diameter of the cable. Besides its diameter, its sheath should also support it well. The basic function of the pulley is also important. However, most people tend to ignore the pulley selection process, resulting in ineffective load-pull capabilities. To avoid such problems, different parameters must be carefully considered during design and installation.
During the design and installation of the pulley system, the ratio of the cable diameter to the largest pulley diameter must be considered. Those who work in the industrial sector will have an idea of ​​this ratio. The greater the D:d ratio, the greater the capacity of the cable to withstand the load. The best way to ensure secure design is to take the right information and use it to design a system that is both robust and secure.
When designing a pulley system, it is important to remember that the pulley needs to have enough power to operate safely. In addition to horsepower, the belt should have sufficient elongation to absorb shock loads. If the elongation of the belt is very small, it is very likely that the teeth will be sheared or broken, causing serious damage to the system. Extensive belt sag should be compensated for by offsetting the driven pulley. Finally, the frame supporting the pulley should be rigid. Otherwise, the non-rigid frame will cause center distance and tooth skipping changes.

Add more pulleys to the system

Adding more pulleys to the spool might have some effect. The friction between the rope and the pulley increases with the number of pulleys, which in practice limits the number of spools. The best solution is to combine the pulleys into one housing. If the load is small enough, adding a few pulleys probably won’t make a difference.
Using multiple pulleys allows a single load to be lifted with half the force required. The longer the rope, the greater the mechanical advantage. In fact, a spool can withstand a load of 100 N. Additionally, adding more pulleys quadrupled the mechanical advantage. In this case, a single 100 N load would require a force of 25 Newtons.
When the rope is used, it stretches as the weight of the object increases. This will make the rope longer, increasing its length and increasing the distance over which the load can be lifted. Eventually, the rope will break and the lifted object will fall. Then you will have to buy a new rope. It may seem like an expensive proposition, but it pays off in the long run.

cast iron pulley

Cast iron pulleys are the most popular choice among industrial users. They are made of solid cast iron and usually cost very little. Their rims are held in place by a mesh that extends from a central boss. They also have spokes and arms that hold them in place. These pulleys are ideal for a variety of applications including fan belts, compressors and conveyors.
V-groove drive pulleys are ideal for general purpose pulleys. It has an inner diameter of one inch and is commonly used in feeders and ventilation curtain systems. Its steel straps prevent rust and ensure it meets or exceeds industry standards. 3-1/2″ cast iron pulleys are also available. In addition to the V-groove drive pulley, there are similar pulleys for power transmission. The V-groove drive pulley is powder coated for added durability.
The cross section of the arm is elliptical, with the long axis twice as long as the short axis. The radius of the arm is equal to the diameter of the pulley. The thickness of the arm is a key factor to consider when purchasing a pulley. If you’re not sure which material you need, you can always consider wooden or steel pulleys. They are lighter and have a higher coefficient of friction than metal pulleys.
pulley

timing pulley

Plastic timing pulleys have many advantages over steel timing pulleys. On the one hand, they are lightweight and corrosion resistant, making them ideal for applications that do not require high torque and tensile strength. Another benefit is their resistance to high temperatures. Plastic timing pulleys are ideal for applications involving flammable gases, solvents or particles. They can last for many years. For more information on the different types of plastic timing pulleys.
Vertical shaft drives require flanged timing pulleys. For large span drives, at least one of these pulleys must be flanged. The flange provides a secure connection to the shaft and prevents ratcheting of the timing belt. Finally, HTD timing belt teeth prevent timing belt ratcheting. These teeth need a large enough space to be seated. However, they can also cause a backlash. These pulleys are not suitable for applications where positional accuracy is critical.
Timing belt systems are designed to avoid such problems. The drive shaft and the driven shaft are aligned with each other. The pulleys are located on different planes and are connected by pitch lines. The pitch line of the timing pulley coincides with the pitch line of the belt. These pulleys are also easier to implement and maintain. It is better to use a synchronous system because the resulting gear system emits less noise than other systems.

China Milk Piston Vacuum Pump (GJB8000-25)     crankshaft pulley	China Milk Piston Vacuum Pump (GJB8000-25)     crankshaft pulley
editor by czh 2022-11-28